
Creating Realistic Sound Fields
REW | FF |
VCR CHANNEL
TUNING
B.SEARCH F.SEARCH
Adjusting DSP Sound Parameters
You can
2 3
ENTER
VOLUME
DVD FM/AM AUX MUTING
SOUND
1 2 3
SETTING
4 5 6
PRO LOGIC
7 8 9
SLOW | SETUP | TEST |
0
ANGLE | ZOOM | D.R.C | DSP MODE |
REPEAT | EFFECT |
SOUND
DSP MODE
EFFECT
Before you start, remember...
•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 2 again.
1 Press DSP MODE (or DSP on the front | DSP MODE |
| |
panel) repeatedly to select the desired |
|
DSP mode. |
|
2 Press SOUND repeatedly to select the | SOUND |
| |
desired DSP sound parameter. |
|
•Each time you press the button, the indication on the display changes as follows:
00 F 00 |
| 00 R 00 |
| REAR |
|
|
CLEAR SEARCH REMAIN SLEEP
4To adjust the output level for the rear speakers
1)Press SOUND repeatedly until “REAR” SOUND
appears on the display.
•Each time you press the button, the indication on the display changes as follows:
00 F 00 |
| 00 R 00 |
| REAR |
|
|
Normal
REVERB
LIVE
ROOM
indication
(canceled)
REAR : To adjust the output level for rear speakers (from
•“REAR
2)Press 3 or 2 to adjust the output level.
3 : Increases the output level.
2 : Decreases the output level.
5 To adjust the overall level of DSP effect | EFFECT |
Press EFFECT repeatedly to adjust the overall level.
“EFFECT (with the current setting)” or “DEFAULT” appears on the display.
•Each time you press the button, the effect level changes as follows:
EFFECT 1
EFFECT 2
DEFAULT EFFECT 3
As the number increases, DSP effect becomes stronger.
•“DEFAULT” is the initial setting. For
Normal
REVERB
LIVE
ROOM
indication
(canceled)
ROOM : To adjust the resonance based on the room size. The larger this value is, the more effective the resonance is (from 04 to 16 by 2 steps).
LIVE (Liveness) : To adjust the liveness. The larger this value is, the more liveness is obtained (from 04 to 16 by 2 steps).
REVERB (Reverberation) : To adjust the reverberation time of the sound (from 0.0 msec to 1.6 msec by
0.2msec steps).
•The following diagram shows the “DEFAULT (initial)” settings of the DSP sound parameters for each DSP mode.
DSP MODE | ROOM | LIVE | REVERB |
HALL | 08 | 16 | 0.4 |
|
|
|
|
THEATER | 04 | 10 | 1.0 |
|
|
|
|
PAVILION | 08 | 04 | 0.2 |
|
|
|
|
DANCE CLUB | 04 | 08 | 1.6 |
|
|
|
|
LIVE CLUB | 08 | 16 | 1.4 |
|
|
|
|
3Press 3 or 2 to adjust the DSP sound parameter.
3 : Increases the value.
2 : Decreases the value.
4Repeat 2 and 3 for setting the other DSP sound parameters.
Note:
Pressing EFFECT to adjust overall level of DSP effect will change
your
24