JVC TH-A5 manual You can enjoy DSP modes

5 Activate Realistic Sound Field

You can enjoy DSP modes.

DSP modes—HALL, THEATER, PAVILION, DANCE CLUB, LIVE CLUB

DSP modes take effect only when you enjoy a disc recorded using Linear PCM—the LINEAR PCM indicator lights up on the display.

Sound signal indicators on the display

To activate DSP modes

Press DSP MODE (or DSP on the front panel). DSP MODE

The DSP indicator lights up and the current DSP mode appears on the display for a while.

•Each time you press the button, DSP mode changes as follows:

HALL THEATER PAVILION

Normal

indication LIVE CLUB DANCE CLUB (canceled)

–For in-depth information about DSP modes, see “Creating Realistic Sound Fields” on pages 19, 23, and 24.

Note:

Before activating the realistic sound field, adjust the speaker setting to bring out the best performance from this system.

For in-depth information about adjusting the speaker setting, see “Speaker Settings” on pages 16 and 17.

6 Stop Playback

Press 7 twice.

TUNER PRESET

Playback stops completely and “VCD” or “CD” appears on the display. (The DVD player goes on working for 3 minutes after playback stops.)

•This system can memorize the end point even

when you press 7 once. When you start playback again by pressing 3/8, playback begins from where it has been stopped— Resume play.

To remove the loaded disc

Press 0.

“OPEN” appears on the display and the disc tray comes out.

To close the disc tray, press 0 again.

•If you do not press the button, the disc tray closes automatically after 35 seconds.

To turn off the power (into standby)

Press STANDBY/ON		AUDIO (or	STANDBY/ON
STANDBY/ON	on the front panel).
			AUDIO

The illumination lamp goes off and the STANDBY lamp lights up.

•If you press STANDBY/ON AUDIO (or

STANDBY/ON on the front panel) while the disc tray is kept open, the disc tray closes automatically, then the system is turned off.

•A small amount of power is consumed even in standby mode. To turn the power off completely, unplug the AC power cord.

13