Creating Realistic Sound Fields
English
REW | FF |
| VCR CHANNEL |
| TUNING |
B.SEARCH | F.SEARCH |
2 3
ENTER
VOLUME
DVD | FM/AM | AUX | MUTING | AUX |
1 | 2 | 3 | SOUND | SOUND |
|
| |||
|
|
| SETTING |
|
4 | 5 | 6 |
| PRO LOGIC |
|
|
| PRO LOGIC | |
7 | 8 | 9 |
|
|
SLOW |
| SETUP | TEST |
|
| 0 |
|
| DSP MODE |
|
|
|
|
ANGLE | NTSC/PAL | D.R.C | DSP MODE |
| ZOOM |
|
|
REPEAT | PROGRAM | EFFECT |
CLEAR SEARCH REMAIN SLEEP
Adjusting Dolby Surround
You can adjust the following settings while activating Dolby Surround.
It is recommended that you make adjustments from your actual listening point while listening to reproduced sounds.
–Output balance for the front speakers
–Output balance for the rear speakers
–Output level for the rear speakers*
–Output level for the subwoofer
•When Dolby 3 Stereo is activated, you cannot adjust the rear speakers and subwoofer levels.
*The adjustment is separately memorized for Digital Multichannel Surround (Dolby Digital and DTS Digital Surround), and for Dolby Pro Logic.
•Dolby Surround cannot be used with DSP modes. Once one of Dolby Surround is activated, DSP modes in use will be canceled.
Before you start, remember...
3 Press PRO LOGIC repeatedly on the | PRO LOGIC |
remote control to select Dolby Pro Logic |
|
or Dolby 3 Stereo. |
|
The PRO LOGIC indicator lights up on the display.
•Each time you press the button, the indication changes as follows:
PRO LOGIC 
3 STEREO
STEREO
(canceled)
Now, you are ready to start adjustments.
•To adjust the output balance for the front speakers and the rear speakers, go to the next step.
•To adjust the output level for the center speaker, the rear speakers, and the subwoofer, go to step 5.
4To adjust the output balance for the front speakers and the rear speakers
1) Press SOUND repeatedly until one of | SOUND |
the following adjustment indications |
|
appears on the display. |
|
•Each time you press the button, the indication on the display changes as follows:
00 F 00 
00 R 00 
CEN
Normal indication |
| SW |
| REAR |
(canceled) |
|
| ||
|
|
|
|
00 F (Front) 00 : To adjust the output balance for the front speakers.
00 R (Rear) 00 : To adjust the output balance for the rear speakers.
•When selecting “3 STEREO,” you cannot adjust the output balance for the rear speakers.
•“00 F 00” and “00 R 00” are the initial settings (the output balances are at the center position). If you have already changed the setting, another value will appear.
2) Press 3 or 2 to adjust the output balance.
• Make sure that you have set the speaker information correctly |
(see page 16). You cannot adjust the speaker output balance |
and levels when you have set the speaker settings to “NONE.” |
3: Decreases the left speaker
output, or restores the right speaker output.
ENTER
• There is a time limit in doing the following steps. If the setting is |
canceled before you finish, start from step 3 again. |
1 Press AUX to select the | DVD FM/AM AUX MUTE |
external component as |
|
the source. |
|
2Start playing a source encoded with Dolby Surround.
2 : Decreases the right speaker output, or restores the left speaker output.
•Each output balance changes from
OFF (silence),
3)Repeat 1) and 2) for setting the other speakers.
22
