JVC TH-A5 manual Adjusting DSP Sound Parameters

English

Creating Realistic Sound Fields

REW FF

VCR CHANNEL

TUNING

B.SEARCH F.SEARCH

Adjusting DSP Sound Parameters

You can fine-adjust DSP modes more minutely by changing three parameters—room, liveness, and reverberation.

2 3

ENTER

VOLUME

DVD FM/AM AUX MUTING

SOUND

1 2 3

SETTING

4 5 6

PRO LOGIC

7 8 9

SLOW SETUP TEST

0

ANGLE	NTSC/PAL	D.R.C	DSP MODE
	ZOOM
REPEAT	A-B REPEAT	PROGRAM	EFFECT

SOUND

DSP MODE

EFFECT

Before you start, remember...

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 2 again.

1 Press DSP MODE (or DSP on the front	DSP MODE
panel) repeatedly to select the desired
DSP mode.
2 Press SOUND repeatedly to select the	SOUND
desired DSP sound parameter.

•Each time you press the button, the indication on the display changes as follows:

00 F 00 00 R 00 REAR

CLEAR SEARCH REMAIN SLEEP

4To adjust the output level for the rear speakers

1)Press SOUND repeatedly until “REAR” SOUND

appears on the display.

•Each time you press the button, the indication on the display changes as follows:

00 F 00 00 R 00 REAR

Normal REVERB LIVE ROOM indication

(canceled)

REAR : To adjust the output level for rear speakers (from –06 dB to +06 dB).

•“REAR –06dB” is the initial setting. If you have already changed the setting, another value will appear.

2)Press 3 or 2 to adjust the output level.

3: Increases the output level.

2 : Decreases the output level.

5 To adjust the overall level of DSP effect EFFECT

Press EFFECT repeatedly to adjust the overall level.

“EFFECT (with the current setting)” or “DEFAULT” appears on the display.

•Each time you press the button, the effect level changes as follows:

EFFECT 1 EFFECT 2

DEFAULT EFFECT 3

As the number increases, DSP effect becomes stronger.

•“DEFAULT” is the initial setting. For in-depth information about “DEFAULT (initial)” setting, see the table to the right.

Normal REVERB LIVE ROOM indication

(canceled)

ROOM : To adjust the resonance based on the room size. The larger this value is, the more effective the resonance is (from 04 to 16 by 2 steps).

LIVE (Liveness) : To adjust the liveness. The larger this value is, the more liveness is obtained (from 04 to 16 by 2 steps).

REVERB (Reverberation) : To adjust the reverberation time of the sound (from 0.0 msec to 1.6 msec by

0.2msec steps).

•The following diagram shows the “DEFAULT (initial)” settings of the DSP sound parameters for each DSP mode.

DSP MODE	ROOM	LIVE	REVERB
HALL	08	16	0.4
THEATER	04	10	1.0
PAVILION	08	04	0.2
DANCE CLUB	04	08	1.6
LIVE CLUB	08	16	1.4

3Press 3 or 2 to adjust the DSP sound parameter.

3: Increases the value.

2 : Decreases the value.

4Repeat 2 and 3 for setting the other DSP sound parameters.

Note:

Pressing EFFECT to adjust overall level of DSP effect will change

your fine-adjustments to the fixed level.

24