JVC TH-A5 manual Stop Playback

5 Activate Realistic Sound Field

You can enjoy two kinds of surround—Digital Multichannel Surround (Dolby Digital and DTS Digital Surround) and DSP modes.

Digital Multichannel Surround—Dolby Digital and DTS Digital Surround

Dolby Digital or DTS Digital Surround takes effect only when you enjoy a disc encoded with its signals—the DOLBY DIGITAL or DTS indicator lights up on the display.

Sound signal indicators on the display

6 Stop Playback

Press 7 twice. TUNER PRESET

Playback stops completely and “DVD” appears on the display. (The DVD player goes on working for 3 minutes after playback stops.)

•This system can memorize the end point even when you press 7 once. When you start playback again by pressing 3/8, playback begins from where it has been stopped—Resume play.

To remove the loaded disc

Press 0.

“OPEN” appears on the display and the disc tray comes out.

To close the disc tray, press 0 again.

•If you do not press the button, the disc tray closes automatically after 35 seconds.

English

To activate Dolby Digital or DTS Digital Surround

When a disc encoded with the Dolby Digital or DTS Digital Surround is loaded, the system detects it and starts playing the disc automatically with Multichannel Surround activated.

–For in-depth information about surround modes, see “Creating Realistic Sound Fields” on pages 18 and 21.

DSP modes—HALL, THEATER, PAVILION, DANCE CLUB, LIVE CLUB

DSP modes take effect only when you enjoy a disc recorded using Linear PCM—the LINEAR PCM indicator lights up on the display.

Sound signal indicators on the display

To activate DSP modes

DSP MODE

Press DSP MODE (or DSP on the front panel).

The DSP indicator lights up and the current DSP mode appears on the display for a while.

• Each time you press the button, DSP mode changes as follows:

HALL THEATER PAVILION

Normal

indication LIVE CLUB DANCE CLUB (canceled)

–For in-depth information about DSP modes, see “Creating Realistic Sound Fields” on pages 19, 23, and 24.

Note:

Before activating the realistic sound field, adjust the speaker setting to bring out the best performance from this system.

For in-depth information about adjusting the speaker setting, see “Speaker Settings” on pages 16 and 17.

To turn off the power (into standby)

Press STANDBY/ON		AUDIO (or	STANDBY/ON
STANDBY/ON	on the front panel).		AUDIO

The illumination lamp goes off and the STANDBY lamp lights up.

•If you press STANDBY/ON AUDIO (or

STANDBY/ON on the front panel) while the disc tray is kept open, the disc tray closes automatically, then the system is turned off.

•A small amount of power is consumed even in standby mode. To turn the power off completely, unplug the AC power cord.

11