JVC TH-A75 manual Getting started, Connections, Connecting a TV, 7Selecting the color system

Getting started

Connections

•Do not connect the AC power cord until all other connections have been made.

•Since different components often have different terminal names, carefully read the instructions supplied with the component you are going to connect.

Connecting a TV

To view pictures and on-screen displays, connect a TV to the center unit.

•Distortion of picture may occur when connecting to a TV through a VCR, or to a TV with a built-in VCR.

•You need to set “MONITOR TYPE” on the PICTURE menu correctly according to the aspect ratio of your TV. See page 53.

7Selecting the color system

This system is compatible with the PAL and NTSC systems. Set the VIDEO OUT SELECT switch on the rear panel in standby mode to match the color system of your TV. Also make sure that the color system of a DVD, VCD, or SVCD disc labeled on the package matches your TV.

•If you use a multi-system TV, by setting “MONITOR TYPE” on the PICTURE menu to an appropriate “MULTI” option, the system outputs a video signal by the same format recorded on the disc (i.e. if you play an NTSC disc, the system outputs a signal by the NTSC format) regardless of the VIDEO OUT SELECT switch setting. See page 53.

PAL NTSC

VIDEO OUT SELECT

7Connecting a TV

Connect a TV using one of the following.

• You can get a better picture quality in the order—Component video > S-video > Composite video.

•Through the component video jacks

•Connect “Y” to “Y,” “PB” to “PB,” and “PR” to “PR” correctly.

•If your TV supports the progressive video input, you can enjoy a high quality picture by making the progressive scanning mode active. See page 19.

SPEAKERS	SURROUND BACK			VCR	AUDIO IN	DBS	FM 75		AM LOOP
LEFT	SPEAKER		R	L		R	L
							DIGITAL IN
							(DBS)
	VCR IN	DBS IN	OUT				COAXIAL		AM EXT
								ANTENNA
				VIDEO
							Y	PB	PR

4	16
			PAL	NTSC
	AV COMPU	S-VIDEO	VIDEO OUT SELECT		COMPONENT VIDEO OUT
	LINK-

Green	Red
	Blue

TV

•Through the S-video jacks

			VCR	AUDIO	IN	DBS		FM 75		AM LOOP
		R	L			R	L	DIGITAL IN
								(DBS)
VCR IN	DBS IN	OUT						COAXIAL		AM EXT
			VIDEO						ANTENNA
								Y	PB	PR
			PAL	NTSC
S-VIDEO			VIDEO OUT SELECT					COMPONENT VIDEO OUT
								TV

Match the ∞ mark on the plug

to the one on the	S-video
center unit.	cord (not
	supplied)
	To S-video input

Component
video cord	• Through the composite video jacks
(not supplied)

To component input

NOTES:

				VCR	AUDIO	IN	DBS		FM 75		AM LOOP
			R	L			R	L	DIGITAL IN
									(DBS)
	VCR IN	DBS IN	OUT						COAXIAL		AM EXT
				VIDEO					ANTENNA
									Y	PB	PR
				PAL	NTSC
AV COMPU	S-VIDEO			VIDEO OUT SELECT					COMPONENT VIDEO OUT
INK-
									TV

•If the component video input jacks of your TV are of the BNC type, use a plug adapter to convert the pin plugs to BNC plugs (not supplied).

•After connecting your TV, select the video output jack type you watch the DVD playback (see page 25).

Composite video cord (supplied)

To composite video input

7