JVC TH-A75 manual About the indications on the display, Resume playback function see

To select a particular title, chapter or track using number buttons

Title on DVD	:While stopped
Chapter on DVD	:During playback

Track on VCD/SVCD :During playback with the PBC function deactivated or while stopped

Track on Audio CD :During playback or while stopped

From the remote control ONLY: Press the number buttons.

•To select 3, press 3.

•To select 14, press +10 then 4.

•To select 24, press +10, +10, then 4.

•To select 40, press +10, +10, +10 then 10.

The selected title, chapter, or track number starts playing.

NOTE:

The number buttons may be also used to select an item on the menus of DVD or of VCD/SVCD with PBC function.

About the indications on the display

While playing back a disc, the playback information appears on the display.

Ex.: When playing back a DVD

	Chapter no.	Elapsed playing time
				L C			R
			LFE S.WFR
	DIGITAL			LS		RS
	SURROUND
Surround/DSP mode		Currently activating speakers
		and incoming signal**
Ex.: When playing back an Audio CD
	Disc type	Elapsed playing time*
	LINEAR PCM		L			R
					S.WFR
Surround/DSP mode Track no. Currently activating
		speakers and incoming
		signal**

NOTES:

•You can change the display pattern of time information. See page 34.

•The current disc type information appears as follows:

–“VCD”: shows a VCD or SVCD is loaded.

–“CD”: shows an Audio CD is loaded.

*When a VCD or SVCD with PBC function is played, the time

information does not appear, but “PBC” appears. **See page 30 for details.

Resume playback function (see page 56):

If you turn off the power while playing back a disc, the position where the playback has been stopped is stored. The RESUME indicator lights up on the display when the resume function is activated.

To resume playback from that position, press DVD or PLAY on the remote control.

•The resume playback function does not work for Audio CDs.

Preventing screen burn-out—screen saver function

A TV screen may be burned out if a static picture is displayed for a long time. To prevent this, the system automatically dims the screen if a static picture is displayed for over 5 minutes— the screen saver function.

•Pressing any button will cancel the screen saver function.

•If you do not want to use the screen saver function, see page 53.

21