SPK. SETTING menu
SPK. SETTING |
|
|
|
| SIZE |
|
|
| LEVEL |
|
|
| DISTANCE |
|
|
| CROSS OVER | 200Hz | |
| RETURN TO INITIAL |
| |
SELECT | USE | TO SELECT, USE ENTER TO CONFIRM. | |
ENTER | TO EXIT, PRESS CHOICE. |
| |
¶SIZE
Select this to enter the SIZE sub- menu.
•You can also set the speaker sizes using SETTING/ADJUST buttons on the remote control (see page 24).
SIZE |
| ¶LEVEL | LEVEL |
| |
FRONT SPEAKER | SMALL | Select this to enter the LEVEL | CENTER SPEAKER | 0dB | |
CENTER SPEAKER | SMALL | SURROUND LEFT SPEAKER | 0dB | ||
SURROUND SPEAKER SMALL | SURROUND RIGHT SPEAKER | 0dB | |||
SURROUND BACK SPEAKER SMALL | • You can also select sound | SURROUND BACK SPEAKER | 0dB | ||
SUB WOOFER | USE | output levels using the number | SUB WOOFER | 0dB | |
|
| TEST TONE |
| ||
|
| buttons on the remote control |
|
| |
|
| (see pages 17 and 32). |
|
| |
Select one of the sizes for each speaker.
LARGE : Select when the cone speaker size is larger than 12 cm.
SMALL : Select when the cone speaker size is smaller than 12 cm.
NONE : (Only for “SURROUND BACK SPEAKER”) Select when no speaker is connected.
CAUTION:
When using the supplied speakers, select “SMALL” for each. Selecting “LARGE” will damage the speakers.
Adjust the output level within the range of
You can also adjust the speaker output levels checking the test tone from each speaker.
•Adjust the speaker levels so that you can hear the sound through all the speakers at the same level.
TEST TONE
Select this to start or stop the test tone.
To go back to the SPK. SETTING menu
Press Cursor 3/2.
NOTES: |
•If you have selected “SMALL” for the front speakers, you cannot select “LARGE” for the center, surround, and surround back speakers.
•If you have selected “SMALL” for the surround speakers, you cannot select “LARGE” for the surround back speaker.
NOTES: |
•When “NONE” is selected for the surround back speaker, the test tone does not come out of the surround back speaker and you cannot adjust the surround back speaker’s output level.
•The test tone for the subwoofer does not output.
SUB WOOFER
This item fixed to “USE.”
To go back to the SPK. SETTING menu
Press Cursor 3/2.
¶DISTANCE
Select this to enter the DISTANCE
•You can also set the distance from your listening point using SETTING/ADJUST button on the remote control (see page 25 for details).
DISTANCE |
|
FRONT SPEAKER | 3.0m |
CENTER SPEAKER | 3.0m |
SURROUND SPEAKER | 3.0m |
SURROUND BACK SPEAKER | 3.0m |
TEST TONE |
|
Speaker diagram
Left front speaker
Subwoofer
Left surround speaker 
Center speaker
Right front speaker
Right surround 
speaker
Surround back speaker
Set the distance from the listening point to each speaker with the range of 0.3 m to 9.0 m (in 0.3 m interval).
TEST TONE
Select this to start or stop the test tone.
To go back to the SPK. SETTING menu
Press Cursor 3/2.
NOTES: |
•If you have selected “NONE” for the surround back speaker, you cannot set the speaker distance for the surround back speaker.
•When “NONE” is selected for the surround back speaker, the test tone does not come out of the speaker.
•The test tone for the subwoofer does not output.
TO BE CONTINUED ON THE NEXT PAGE
55
