Connections

Do not connect the power cord until all other connections have been made.

Connecting to an analog component

You can enjoy the sound of an analog component.

Center unit

S-video cord

 

 

(not supplied)

 

RCA pin plug

 

 

or

 

cord

 

(not supplied)

 

 

Composite video

 

 

cord

 

 

(not supplied)

 

 

1

2

3

 

VCR (1 3 or 2 3)

 

 

TV (3)

 

Cassette recorder (3)

1To composite video output

2 To S-video output

3 To audio output

NOTE

The signals input to the VIDEO jack of the VCR IN jacks will be output only from the VIDEO jack of the VIDEO OUT jacks, not from the S-VIDEO jack of the VIDEO OUT jacks.

Connecting to a digital component

You can enjoy the sound of a digital component.

Center unit

To digital optical output

DBS* tuner

MD player

Digital optical cord (not supplied)

*DBS = Direct Broadcasting Satellite

NOTE

Only digital audio signals can be input when selecting “DBS” as the source to play. (See page 16.) When connecting a video component such as a DBS tuner, operate this system to listen to the sound.

Connecting a USB mass storage class device

You can connect a USB mass storage class device such as a USB flash memory device, hard disc drive, multimedia card reader, digital camera, etc. to this system.

After connecting a USB mass storage class device to this system and selecting USB MEMORY as the source, the file control display appears on the TV screen. (See page 27.)

USB cable (not supplied)

Center unit (on the

 

front panel)

NOTE

When connecting a USB mass storage class device, refer also to its manual.

Connect one USB mass storage class device to the system at a time. Do not use a USB hub.

You cannot charge the USB mass storage class device while connecting it to the USB MEMORY jack.

While playing back a file in a USB mass storage class device, do not disconnect the device. It may cause a malfunction of both the system and the device.

JVC bears no responsibility for any loss of data in the USB mass storage class device while using this system.

When connecting with a USB cable, use a cable less than 1 m in length.

This system is compatible with the USB 2.0 Full-Speed (not compatible with the USB 1.1).

You can play back the following types of files in a USB mass storage class device (maximum data transfer rate: 2 Mbps):

Music: MP3, WMA

Picture: JPEG

Movie: MPEG-4 (ASF), DivX (maximum frame rate of 30 fps for progressive)

You cannot play back a file larger than 2 GB.

When playing a file which has a large transfer rate, frames or sounds may be dropped during playback.

This system cannot recognize a USB mass storage class device whose rating exceeds 5 V/500 mA.

This system may not recognize some USB mass storage class devices.

This system may not play back some files even though their formats

are listed above.

.

Connecting the power cord

Make sure that all other connections have been completed.

Center unit

Powered

 

subwoofer

Power cord

Power cord

(supplied)

 

Plug into AC outlets.

CAUTION

Disconnect the power cord before cleaning or moving the system.

Do not pull on the power cord to unplug the cord. When unplugging the cord, always grasp and pull the plug so as not to damage the cord.

If the AC outlets do not match the AC plugs, use the supplied AC plug adapter.

12

Page 109
Image 109
JVC TH-C90 manual Connecting to an analog component