JVC TH-C90 manual Setting DVD preferences, Buttons described below are used on pages 36

Setting DVD preferences

7Subwoofer menu (SUBWOOFER)

LEVEL

You can set the output level of the subwoofer in the –6 dB to +6 dB range.

CROSS OVER

The signals below the preset frequency level will be sent to and be reproduced by the subwoofer.

Select one of the crossover frequency levels according to the size of the small speaker connected.

•120Hz: Select when the cone speaker unit built in the speaker is about 8 cm.

•150Hz: Select when the cone speaker unit built in the speaker is about 6 cm.

•200Hz: Select when the cone speaker unit built in the speaker is about 5 cm.

: Other setting menu (OTHERS)

7RESUME

You can activate or deactivate Resume Playback function. (See page 28.)

7ON SCREEN GUIDE

You can activate or deactivate the on-screen guide icons. (See page 19.)

7DivX registration menu (DivX REGISTRATION)

The system has its own Registration Code for DivX playback. You can confirm the code of your system.

•Once you play back a disc created by using the Registration Code, the system’s code is overwritten by a totally different new one for copyright protection purpose.

Tuner operations

IMPORTANT

Before using the remote control for the following operation;

1 Set the remote control mode selector to

AUDIO.

2 Press FM/AM.

The buttons described below are used on pages 36 and 37.

Number

buttons

Remote control mode selector

Cursor (3/2)

Setting the AM tuner interval spacing

Some countries space AM stations 9 kHz apart, and some countries use 10 kHz spacing.

You can only change the AM tuner interval spacing while selecting AM as the band.

On the center unit ONLY:

7To change the interval spacing into 10 kHz

Press 8 while holding down 7.

7To change the interval spacing into 9 kHz

Press 3 while holding down 7.

Manual tuning

On the remote control:

1Press FM/AM repeatedly to select the band.

Example: When the system is tuned in to AM 810 kHz.

2Press TUNING 9/( repeatedly until

you find the frequency you want.

When you hold down the button until the system starts searching for stations and then release it, the system stops searching automatically when a station of sufficient signal strength is tuned in to.

On the center unit:

1Press SOURCE repeatedly to select the band (FM or AM).

2Press TUNING +/– repeatedly until you find the frequency you want.

NOTE

•When an FM stereo program is received, the ST indicator lights on the display window.

36