Setting DVD preferences
7Subwoofer menu (SUBWOOFER)
LEVEL
You can set the output level of the subwoofer in the
CROSS OVER
The signals below the preset frequency level will be sent to and be reproduced by the subwoofer.
Select one of the crossover frequency levels according to the size of the small speaker connected.
•80Hz: Select when the cone speaker unit built in the speaker is about 8 cm.
•100Hz: Select when the cone speaker unit built in the speaker is about 6 cm.
•120Hz: Select when the cone speaker unit built in the speaker is about 5 cm.
: Other setting menu (OTHERS)
7RESUME
You can activate or deactivate Resume Playback function. (See page 29.)
7ON SCREEN GUIDE
You can activate or deactivate the
7DivX registration menu (DivX REGISTRATION)
The system has its own Registration Code for DivX playback. You can confirm the code of your system.
•Once you play back a disc created by using the Registration Code, the system’s code is overwritten by a totally different new one for copyright protection purpose.
Tuner operations
IMPORTANT
Before using the remote control for the following operation;
1 Set the remote control mode selector to
AUDIO.
2 Press FM/AM.
The buttons described below are used on pages 37 and 38.
Number 
buttons
Remote control mode selector
Cursor (3/2)
Setting the AM tuner interval spacing
Some countries space AM stations 9 kHz apart, and some countries use 10 kHz spacing.
You can only change the AM tuner interval spacing while selecting AM as the band.
On the center unit ONLY:
7To change the interval spacing into 10 kHz
Press 8 while holding down 7.
7To change the interval spacing into 9 kHz
Press 3 while holding down 7.
Manual tuning
On the remote control:
1Press FM/AM repeatedly to select the band.
Example: When the system is tuned in to AM 810 kHz.
2Press TUNING 9/( repeatedly until
you find the frequency you want.
When you hold down the button until the system starts searching for stations and then release it, the system stops searching automatically when a station of sufficient signal strength is tuned in to.
On the center unit:
1Press SOURCE repeatedly to select the band (FM or AM).
2Press TUNING +/– repeatedly until you find the frequency you want.
NOTE
•When an FM stereo program is received, the ST indicator lights on the display window.
37
