JVC TH-C90 manual Operating the DBS tuner or Catv converter, See page 13 for button locations

Operating external components with the remote control

See page 13 for button locations.

Operating the DBS tuner or CATV converter

7To set the manufacturer’s code

1Slide the remote control mode selector to VCR/DBS.

2 Press DBS.

3 Press and hold F VCR/DBS.

4	Keep the button pressed until step 5 is finished.
	Press ENTER.
5	Press number buttons (1-9, 0) to enter
	the manufacturer’s code (2 digits).
	Examples:
	For a GI Jerrold product: Press 0, then 1.
	For a Sony product: Press 2, then 0.
	Manufacturer	Code
	Echostar	21
	GI Jerrold	01*, 02, 03, 04, 05, 06, 07, 08
	Hamlin	15, 16, 17, 18
	Pioneer	13, 14
	RCA	19
	Scientific Atlanta	09, 10
	Sony	20
	Zenith	11, 12
6	* “01” is the initial setting.
	Release F VCR/DBS.

If there is more than one code listed for your brand, try each one until you enter the correct one.

7Operation

Aim the remote control at the DBS tuner or CATV converter.

IMPORTANT

Before using the remote control to operate a

DBS tuner or CATV converter;

1 Set the remote control mode selector to VCR/DBS.

2 Press DBS.

The following buttons are available:

F VCR/DBS: Turns DBS tuner or CATV converter on and off.

CH +/–:Changes the channels.

1-10, 0, h10 (100+): Selects the channel.

Operating the VCR

7To set the manufacturer’s code

1Slide the remote control mode selector to VCR/DBS.

2 Press VCR.

3 Press and hold F VCR/DBS.

Keep the button pressed until step 5 is finished.

4 Press ENTER.

5 Press number buttons (1-9, 0) to enter the manufacturer’s code (2 digits).

Examples:

For a Philips VCR: Press 0, then 9.

For an NEC VCR: Press 2, then 5.

Manufacturer	Code	Manufacturer	Code
JVC	01*, 02, 03	Philips	09
Emerson	11, 26	RCA	05, 06
Fisher	29	Samsung	24
Funai	10, 14, 15, 16	Sanyo	21, 22, 23
Gold Star	12	Sharp	27, 28
Hitachi	04	Shintom	30
Mitsubishi	13	Sony	18, 19, 20
NEC	25	Zenith	08
Panasonic	07, 17

* “01” is the initial setting.

6 Release F VCR/DBS.

If there is more than one code listed for your brand, try each one until you enter the correct one.

7Operation

Aim the remote control at the VCR.

IMPORTANT

Before using the remote control to operate a

VCR;

1 Set the remote control mode selector to VCR/DBS.

2 Press VCR.

The following buttons are available:

F VCR/DBS:	Turns VCR on and off.
3 (play button):	Starts playback.
7:	Stops operation.
8:	Pauses playback.
y:	Fast forwards video tape.
1:	Rewinds video tape.
REC:	Press this button together with 3 (play
	button) to start recording or together with 8
CH +/–:	to pause recording.
	Changes the TV channels on the VCR.

NOTE

•When operating a VCR or DBS tuner/CATV converter;

–The source setting of VCR or DBS remains after you have changed the remote control mode selector to AUDIO or TV. When operating VCR or DBS tuner/CATV converter again, it is not necessary to press VCR or DBS after setting the remote control mode selector.

14