JVC TK-C215VP4U/E manual Base, Fastening Screw for Dome Cover, AC 24 V/DC 12 V Power Supply Wire

Introduction

Name of Parts (continued)

Camera (continued)

L

K

J TK-C215VP12U/E only

I

G H

GBase

Mount the base to the ceiling, wall or electrical box before mounting the camera.

(A Pg. 21)(A Pg. 31)

H Fastening Screw for Dome Cover

This is a fastening screw for the dome cover. Use a supplied wrench to fasten/unfasten the screw.

I AC 24 V/DC 12 V Power Supply Wire

DC 12 V Input: Red (+12 V), Black (GND)

AC 24 V Input: Nonpolar

Note:

●In order to use the optional heater unit sold separately (part number KA-ZH215) with this camera an AC 24 V power supply MUST be use.

●The AC 24 V power supply should conform to the following:

U-type: Class 2 only

E-type: Isolated power supply only

●For inquiries on the heater, consult your nearby JVC dealer.

J Alarm signal cable (TK-C215VP12U/E only)

Yellow (ALARM IN), Gray (ALARM GND). (A Pg. 18)

K Protection Cover

Upon connecting the video cable please protect the BNC connection using this rubber cover.

L Video signal output connector (BNC)

(A Pg. 17)

10