![](/images/new-backgrounds/1262137/26213747x1.webp)
Installation and Connection
Mounting the camera unit (continued)
4. Inserting the silica gel supplied
Take out the silica gel from the aluminum package, insert it into the silica gel insertion space of the camera unit and fasten using the lug plate.
Silica Gel Insertion
Space
Silica Gel
Lug Plate
Memo:
●During reconnection or
●Consult your nearby JVC’s dealer on the replacement procedures.
Serial number of part to be replaced: Use a
Note:
●When mounting is performed on a rainy day, make sure that rain water does not enter this unit.
●Make sure to use the silica gel supplied. Failure to do so may cause the camera lens and dome cover to fog.
●If the angle of view is not adjusted immediately after mounting the camera, insert the silica gel after adjustment is completed. The silica gel loses its effect if it is exposed to the air for a prolonged period of time.
24