Name of Parts
Camera
A |
B |
C
F
D
E
A Mounting hole 2
Use these when mounting the camera to the ceiling, wall or electrical box.
(A Pg. 21)(A Pg. 31)
C Mounting Screw for Fall Prevention Wire
Use this screw when mounting the fall prevention wire to this unit. (Fall prevention wire is not supplied with this product.)
Note:
●To mount the camera using the electrical box, consult the dealer from which this product is purchased or any nearby JVC dealer.
B Hole for Connecting Cable and Piping
This is a hole for drawing out the connecting cable.
This hole can also be used to mount directly to pipes. (Piping hole:
(A Pg. 32)
Note:
●Connect the fall prevention wire to prevent this unit from falling accidentally. The camera unit may fall if this wire is not connected.
D Dome Cover
E Inner Dome
Set the switches as well as angle of view before mounting the camera. (A Pg. 20)
F Plug for Piping Hole and Piping Hole (Side)
Use this plug when mounting directly to pipes from the side. The plug for piping hole is mounted to this hole by default. (A Pg. 33)
9
