Note:
●Make sure that the dome cover is firmly fastened.
Otherwise, the humidity level may rise, which may result in fogging and even falling of the cover.
●Ensure that the fall prevention wire of the dome cover is not caught in the space between the dome cover and base. Failing to do so may cause the
Mounting the camera using the electrical box
Mounting the base to the electrical box.
1. Setting the switches (A Pg. 20)
2. Removing the camera unit from the base (A Pg. 21)
3. Mounting the base to the electrical box
Mount the base to the electrical box by using the 2 mounting holes and 2 M4 screws.
Memo:
●M4 screws are not supplied with this product.
4 Inch square electrical box
Base
M4 Screw
4. The following procedures are same as normal mounting
●Cable Connection (A Pg. 22)
●Mounting the camera unit to the base
●(A Pg. 23)
●Adjusting Images (A Pg. 25)
●Mounting the inner dome (A Pg. 30)
●Mounting the dome cover (A Pg. 30)
31
