JVC VN-C215V4U Name and Function of Parts, AH B, (A Pg. 22), (A Pg. 22), Camera unit, C Outer case, D Dome cover, E Inner dome, G Cable ejector hole, [Link] Link indicator

Introduction

Name and Function of PartsCamera unit

I

AH B

A

B

G

C

D F

	Status
E	Link
	Act

A Mounting hole (elliptical)  4Use these when mounting the camera to the electrical box.(A Pg. 22)B Mounting hole (round)  4Use these when mounting the camera to the ceiling or wall. (A Pg. 20, 22)C Outer caseUse this in the following cases:●When mounting the camera directly to the ceiling or on the wall. (A Pg. 20)●When mounting the camera to the electrical box. (A Pg. 22)D Dome coverThe dome cover is fragile. Take care when handling it.E Inner dome

Before mounting the camera, remove it and perform image angle setting. (A Pg. 18, 20)

F Operation check indicator [Status] Status indicator

This indicator appears blinking when the power is turned on and turns off when the camera startup is completed. Check the camera or the connected device if the indicator remains blinking when the camera is in use.

[Link] Link indicatorThis indicator lights up when the camera is linked or connected to the network.[Act] Activity indicator

This indicator lights up during an activity such as data transmission or reception.

G Cable ejector hole

This is used for pulling cables from the side of the camera unit without drilling a hole in the ceiling.

(A Pg. 22)

E-10