LAN Cable ConnectionConnect the camera to a hub or computer using a LAN cable.When connecting to a hubMake use of a straight cable.When connecting to a computerMake use of a Cross Over cable.

LAN cable

Alarm Input/Output Cable Connection

Connect the alarm input/output cables with external devices such as a sensor, buzzer, etc.

Signal name

Cable color

 

 

Alarm input 1

Pink

 

 

Alarm input 2

Blue

 

 

Alarm output 1

Orange

 

 

Alarm output 2

Yellow

 

 

GND

Brown

 

 

Cable to use●Length of 50 m or shorter●UL1007, UL1015 or equivalent products●AWG#22 - AWG#18 or equivalent products

Alarm input/output cables

Solder or crimp

Wind the

 

waterproof

Insulation tape

tape.

 

Note :

●Cross cables cannot be used with some computer models. When connecting VN- C215V4U directly to a computer, make sure to check the computer’s LAN specifications in advance.

Memo :

●Make use of a Category 5 (or higher) cable in the case of 100BASE-TX.

Note :

●Noises from an external source may cause malfunctions even when the cable used is shorter than 50 m. In this case, use a shielded cable or move the cable away from the noise source.

E-26