Mounting the Camera (continued)

Mount by allowing the cable to exit from the side

You can also mount the camera on a ceiling or wall by pulling the cables horizontally instead of drilling a hole.

The basic mounting method is the same as eMounting the camera directly on a ceiling or alongside a wallf (A Pg. 20).

1.Remove the lid of the cable ejector hole and divide the dotted line section of the lid with a longnose pliers.

1

Divide

Cable ejector hole

2

2.Mount the outer case on the ceiling or wall.3.Pull out the cables from the cable ejector hole.4.Connect the cables. (A Pg. 20)5.Close the lid of the cable ejector hole.

5

Mounting the camera to the electrical box

Note :

●Before mounting the camera to electrical boxes, please refer to local building codes for box type to use for low-voltage wiring.

Connecting

1.Align (j) with the shooting direction when mounting the outer case to the electrical box

Outer case mounting screws

FRONTUP

Less than 3 mm

Align with shooting direction

2.Follow steps 2. to 6. of AMount by allowing the cable to exit from the sideB [Connection] (A Pg. 20)

E-22