Assigning the disc title and track titles
You can assign a title to each MD and to each track. Once a title is assigned, it is displayed for later playback for confirmation.
Each title can be composed of up to 64 characters, and can be input using alphabetic characters — uppercase (A to Z) and lowercase (a to z), symbols (see “Available symbols” on the next page), and numerals (0 to 9).
To assign a title using the buttons on the main unit
In the following example, the process is explained from the very first — that is, inserting an MD. If you already start recording or playing, see “To assign a track title during playback or recording” on page 29.
1 Load a recorded MD.
2 Press TITLE.
The display will show “DISC/NO TITLE”.
Each press of the button switches the title assignment function on and off.
Blinks Scrolls
•If a disc title has already been assigned, the title is displayed. When you assign the disc title: Go to step 3.
When you assign the track titles:
First select the track to be titled by turning the jog dial to the right or left. Then, go to step 3.
Blinks Scrolls
3 Press SET.
The title assignment display appears.
The display is divided into the title name area and the character set area.
Cursor (blinks)
4 | Enter a character | Title name area |
| Example: When entering character “ n”. |
|
1Press DISPLAY/CHARACTER repeatedly.
Each press of the button changes the character sets as follows:
Alternately blinks
Character set
area
| Capital letters |
|
| Small letters | |||
| & Symbols |
|
| & Symbols |
| ||
|
|
| Numerals |
|
| ||
|
|
|
|
| |||
2Turn the jog dial until “ n” blinks on the character set area.
• Turning the jog dial continuously can also change the character sets.
3Press SET.
The selected character is entered, and the cursor moves to the next character entry position.
26
