JVC XM-448BK Specifications

J

V

C

0199JTMMDWJEM

EN

VICTOR COMPANY OF JAPAN, LIMITED

Specifications

Specifications and appearance subject to change for improvements without prior notice.

Minidisc digital audio system

Magnetic modulation overwrite format

Non-contacting optical method by

semiconductor laser (λ=780 nm)

44.1 kHz

ATRAC (Adaptive TRansform Acoustic Coding) method

2 channels

5 Hz to 20,000 Hz (±0.5 dB)

93 dB

91 dB

Less than measurable limit

Format

Recording format

Reading format

Sampling frequency

Compression/expansion method

Number of channels

Frequency response

S/N ratio

Dynamic range

Wow/flutter

Input terminals

(Analog)

(Digital)

Output terminal

(Analog)

Power requirements

Power consumption

Dimensions

Mass

Accessories

Received optical

ANALOG IN (pin jack),

OPTICAL DIGITAL IN (square optical connector jack)

Terminal name Reference input level Minimum input level

ANALOG IN 275 mV rms. 100 mV rms.

Terminal name signal wave length Input level

DIGITAL IN 660 nm –24 dBm to –15 dBm

ANALOG OUT (pin jack)

Terminal name Load impedance Output level

ANALOG OUT 10 kohms 1.1 V

AC 120 V , 60 Hz

11 watts (ON), 7 watts (STANDBY)

435 × 112 × 335 mm (W/H/D)

(17 1/8 × 4 13/32 × 13 1/4 inches)

4.3 kg (9.5 lbs)

Remote control unit (1)

Batteries R03 (UM-4)/AAA (24F) (2)

Audio pin cord (2)

Optical digital cable (1)

Compu Link cable (1)

Text Compu Link cable (1)

AC power cord (1)

1 , 2

XM-448BK[J].COVER 99.1.28, 3:21 PM2

Contents

Main INSTRUCTIONS XM-448BK LVT0222-001A [J] MINI DISC RECORDER CAUTION G-1 For U.S.A. Warnings, Cautions and Others Welcome ! Important cautions For safe use, observe the following Table of Contents Parts Index 4 Remote control unit 1 2 3 4 5 Setting up the System Supplied accessories Remote control batteries CAUTION: Handle batteries properly. Operating the remote control unit Connection Example: CD player Signal cable connections Optical digital cable 7 Turning the Power On and Off Power On Power Off Playback Continuous playback 1 Load an MD. 2 Press 6 on the main unit or 3 on the remote control unit. Shortcut: 9 To pause the MD: To select a track Main unit: Remote control unit: Using 4 or : Using the display mode To switch the display information When no track is selected (In Stop mode): When a track has already been selected (During playback or in Stop mode): To change the brightness of the display Page Random playback Repeat playback 14 Recording Things to know before recording Recording operation 1 Load a recordable MD. 2 Press REC PAUSE on the main unit or on the remote control unit. DIGITAL 1 3 Select the input by pressing INPUT SELECTOR on the main unit. 4 Play the source to be recorded. 5 Press 6 on the main unit or 3 on the remote control unit. To stop recording: To pause the MD: 16 To adjust the analog input level To display the remaining recording time Track marking For analog input: Editing Functions MD editing functions Dividing a track (DIVIDE) Page 19 Joining tracks (JOIN) Page 20 Moving a track (MOVE) Page 22 18 Combining editing functions EN17-25.XM-448BK[J]/f 99.1.28, 3:23 PM18 a c a c Dividing a track (DIVIDE) 1 Press EDIT on the main unit or on the remote control unit to select DIVIDE. 2 Press SET on the main unit or on the remote control unit. 3 Play a track to be divided. 4 Press SET when a point where you want to divide the track comes. Joining tracks (JOIN) Page Moving a track (MOVE) 1 Press EDIT on the main unit or on the remote control unit to select MOVE. 2 Press SET on the main unit or on the remote control unit. 3 Select a track number to be moved, then press SET. 4 Select the movement destination track number, then press SET. Erasing a track (ERASE) Page Erasing all tracks in an MD (ALL ERASE) 26 Assigning the disc title and track titles To assign a title using the buttons on the main unit 1 Load a recorded MD. 2 Press TITLE. 3 Press SET. 4 Enter a character (Disc Title) Available symbols 28 (Disc Title) To assign a title using the buttons on the remote control unit 1 Load a recorded MD. 2 Press TITLE. 3 Press SET. 29 To assign a track title during playback or recording COMPU LINK Linked Operation of the Other Optional Components (Compu Link) What is Compu Link Compu Link connections Compu Link-3 features TEXT COMPU LINK Connection with receiver (or amplifier) 32 Connection to CD player or CD changer Rule on Digital Copying SCMS (Serial Copy Management System) About MD (Mini Disc) Role of the cartridge Two disc types Playback-only MD Recordable MD ATRAC (Adaptive TRansform Acoustic Coding) Sound skip guard memory UTOC (User Table Of Contents) 36 Handling MDs MD handling precautions MD Messages Treatment Description Messages MD Restrictions Cause Symptom Troubleshooting Treatment Cause Symptom QUALITY SERVICE HOW TO LOCATE YOUR JVC SERVICE CENTER JVC SERVICE & ENGINEERING COMPANY OF AMERICA DIVISION OF JVC AMERICAS CORP. FACTORY SERVICE CENTER LOCATIONS If you ship the product CAUTION LIMITED W ARRANTY AUDIO-1 V Specifications Specifications and appearance subject to change for improvements without prior notice.