JVC XM-448BK Erasing all tracks in an MD (ALL ERASE)

25
Blinks
Blinks
OR
EDIT
DIVIDE JOIN MOVE
Canceled
(MD total playing time display or Disc title)
ERASE ALL ERASE
12345
6
12345
6
Erasing all tracks in an MD
(ALL ERASE)
The data recorded in an MD can be erased entirely.
1 Press EDIT on the main unit or on the remote control unit
to select “ALL ERASE”.
The ALL ERASE indicator lights up.
Each press of the button switches the editing functions as follows.
2 Press SET on the main unit or on the remote control unit.
• If the display shows “TRACK PROTECTED”, one or more of the tracks in the MD
has been protected against accidental erasure by another component. You cannot
edit such a protected track. To cancel the editing, press EDIT on the main unit or on
the remote control unit.
3 Press ENTER on the main unit or on the remote control
unit.
The change made above is entered temporarily in memory. The display shows
“EDITING” and the TOC indicator lights up.
4 Press 0 on the main unit or on the cover panel of the
remote control unit to eject the MD.
The data in memory is written in the MD before it is ejected.
The display shows “UTOCwriting” during MD writing operation.
• Be careful not to apply impact to the MD recorder during writing temporarily stored
data into the MD. Otherwise the recording may not be able to play later.
• The data in memory is written in the MD also when the power is turned off while
“EDITING” is being displayed.
To cancel editing:
Press EDIT repeatedly on the main unit or on the remote control unit before pressing
ENTER in step 3.
Caution
• Once erased, the tracks can never be restored. An MD
containing recording that you do not want to erase should
be protected by sliding the protect tab (see page 14).
OR
SET
OR
ENTER
OR
EN17-25.XM-448BK[J]/f 99.1.28, 3:23 PM25