JVC XM-448BK Dividing a track (DIVIDE)

19

Dividing a track (DIVIDE)

A track can be divided into desired number of tracks by adding track markings in the

middle, in the desired points or where you want to search later.

This makes it possible to assign track numbers after recording medley music or FM

broadcast. The track number s after the divided track are renumbered automatically.

1 Press EDIT on the main unit or on the remote control unit

to select “DIVIDE”.

The DIVIDE indicator lights up.

Each press of the button switches the editing functions as follows.

2 Press SET on the main unit or on the remote control unit.

3 Play a track to be divided.

Select a track number by turning the jog dial on the main unit or by pressing < / 4 or

¢ / > on the remote control unit.

Then, press 6 on the main unit or 3 on the remote control unit.

• You can also use the numeric keys on the cover panel of the remote control unit to

select the track number. To select a track, see “Selecting a track with the numeric

keys” on page 9.

• You can use ¡ (or 1) to fast forward (or reverse) the track.

4 Press SET when a point where you want to divide the

track comes.

“POSITION” is displayed and the track marking fine-adjustment display appears.

• When the track has been divided as desired, go to step 6.

• If the track has not been divided as desired, fine-adjust the track marking position.

Go to step 5.

• If you notice that the selected track number is wrong, press 7STOP/CANCEL on

the main unit or CANCEL on the remote control unit and repeat from step 3.

• If the display shows “TRACK PROTECTED”, the selected track has been protected

against accidental erasure by another component. You cannot edit such a protected

track. To cancel the editing, press EDIT on the main unit or on the remote control

unit.

Example) Track No. 3 and 4 blink in the music

calendar and the 4-second section from the

divided point will be played repeatedly.

Blinks

Blinks

Increments by 1

Blinks

Blinks

Blinks

Example)

When track No. 3 is selected

Blinks

Blinks

OR

EDIT

DIVIDE JOIN MOVE

Canceled

(MD total playing time display or Disc title)

ERASE ALL ERASE

OR

SET

12345

6

12345

6

OR

OR

SET

12345

6

7

12345

6

OR

EN17-25.XM-448BK[J]/f 99.1.28, 3:23 PM19

Contents

Main INSTRUCTIONS XM-448BK LVT0222-001A [J] MINI DISC RECORDER CAUTION G-1 For U.S.A. Warnings, Cautions and Others Welcome ! Important cautions For safe use, observe the following Table of Contents Parts Index 4 Remote control unit 1 2 3 4 5 Setting up the System Supplied accessories Remote control batteries CAUTION: Handle batteries properly. Operating the remote control unit Connection Example: CD player Signal cable connections Optical digital cable 7 Turning the Power On and Off Power On Power Off Playback Continuous playback 1 Load an MD. 2 Press 6 on the main unit or 3 on the remote control unit. Shortcut: 9 To pause the MD: To select a track Main unit: Remote control unit: Using 4 or : Using the display mode To switch the display information When no track is selected (In Stop mode): When a track has already been selected (During playback or in Stop mode): To change the brightness of the display Page Random playback Repeat playback 14 Recording Things to know before recording Recording operation 1 Load a recordable MD. 2 Press REC PAUSE on the main unit or on the remote control unit. DIGITAL 1 3 Select the input by pressing INPUT SELECTOR on the main unit. 4 Play the source to be recorded. 5 Press 6 on the main unit or 3 on the remote control unit. To stop recording: To pause the MD: 16 To adjust the analog input level To display the remaining recording time Track marking For analog input: Editing Functions MD editing functions Dividing a track (DIVIDE) Page 19 Joining tracks (JOIN) Page 20 Moving a track (MOVE) Page 22 18 Combining editing functions EN17-25.XM-448BK[J]/f 99.1.28, 3:23 PM18 a c a c Dividing a track (DIVIDE) 1 Press EDIT on the main unit or on the remote control unit to select DIVIDE. 2 Press SET on the main unit or on the remote control unit. 3 Play a track to be divided. 4 Press SET when a point where you want to divide the track comes. Joining tracks (JOIN) Page Moving a track (MOVE) 1 Press EDIT on the main unit or on the remote control unit to select MOVE. 2 Press SET on the main unit or on the remote control unit. 3 Select a track number to be moved, then press SET. 4 Select the movement destination track number, then press SET. Erasing a track (ERASE) Page Erasing all tracks in an MD (ALL ERASE) 26 Assigning the disc title and track titles To assign a title using the buttons on the main unit 1 Load a recorded MD. 2 Press TITLE. 3 Press SET. 4 Enter a character (Disc Title) Available symbols 28 (Disc Title) To assign a title using the buttons on the remote control unit 1 Load a recorded MD. 2 Press TITLE. 3 Press SET. 29 To assign a track title during playback or recording COMPU LINK Linked Operation of the Other Optional Components (Compu Link) What is Compu Link Compu Link connections Compu Link-3 features TEXT COMPU LINK Connection with receiver (or amplifier) 32 Connection to CD player or CD changer Rule on Digital Copying SCMS (Serial Copy Management System) About MD (Mini Disc) Role of the cartridge Two disc types Playback-only MD Recordable MD ATRAC (Adaptive TRansform Acoustic Coding) Sound skip guard memory UTOC (User Table Of Contents) 36 Handling MDs MD handling precautions MD Messages Treatment Description Messages MD Restrictions Cause Symptom Troubleshooting Treatment Cause Symptom QUALITY SERVICE HOW TO LOCATE YOUR JVC SERVICE CENTER JVC SERVICE & ENGINEERING COMPANY OF AMERICA DIVISION OF JVC AMERICAS CORP. FACTORY SERVICE CENTER LOCATIONS If you ship the product CAUTION LIMITED W ARRANTY AUDIO-1 V Specifications Specifications and appearance subject to change for improvements without prior notice.