4 Repeating sections of a lesson song

This page will explain how to repeat (loop) specific sections of the selected lesson song between a defined ‘A’

and ‘B’ point, allowing difficult passages to be practiced continuously.

1. Specifying the start point (A) of the loop

After selecting a lesson book and song:

Press the PLAY/STOP button.

The LED indicator for the PLAY/STOP button will turn on, and a one bar count-in will be heard before the song starts to play.

Burgmueller25-01

Bar= 5- 1 Œ=126

Press the SPLIT button to specify the start point of the loop.

The LED indicator for the SPLIT button will start to flash, indicating that the start point (A) of the loop has been set.

2. Specifying the end point (B) of the loop

Press the SPLIT button again to specify the end point of the loop.

The LED indicator for the SPLIT button will turn on, indicating that the end point of the (B) of the loop has been set.

Burgmueller25-01

Bar= 10- 2 Œ=126

The defined ‘A-B’ section of the lesson song will repeat (loop)

* After defining the loop section, press the e or f buttons to adjust the

continuously, allowing the passage to be practiced.

left/right-hand part volume balance.

3. Cancelling the ‘A-B’ loop

Press the SPLIT button once again to cancel the ‘A-B’ loop.

* The loop section can also be specified while the lesson song is paused

The LED indicator for the SPLIT button will turn off and the

by pressing the EFFECTS and REVERB buttons to select the bar.

The last bar cannot precede the first bar.

lesson song will resume normal playback.

 

Music Menu

29

Page 29
Image 29
Kawai CA93, CA63 Repeating sections of a lesson song, Burgmueller25-01 Bar= 5- 1 Œ=126, Burgmueller25-01 Bar= 10- 2 Œ=126