Appendix

sectionAssembly Instructions (CA63 only)

4. Connecting the pedal and power cables

Pass the pedal cable (extending from the back of the pedal board) behind the back board, and through the aperture to the front of the main body.

Connect the pedal cable to the PEDAL terminal on the base of the main body, ensuring the notched plug faces the rear of the instrument.

When disconnecting the pedal cable, press and

hold the notch and pull the plug gently.

Pedal cable

 

 

Power cable

Connect the power cable lto the AC IN terminal on the base of the main body, then pass the cable through the back board aperture, and out to the rear of the instrument.

The illustration below shows the location of the PEDAL and AC

IN terminals on the underside of the main body.

Front

PEDAL

Rear

AC IN

 

Attach the cable clamps,

 

fix the cables in place

With the pedal and power cables connected, attach the two cable clamps k to the rear of the left and right side panels, then fix the cables in place to tidy their appearance.

5. Attaching the headphone hook (optional)

A headphone hook is included with the CA93/CA63 digital piano and can be used to hang headphones when not in use.

If desired, attach the headphone hook to the underside of the main body using the two tapping screws provided.

6. Adjusting the pedal support bolt

Turn the pedal support bolt anti-clockwise, extending the bolt until it makes contact with the floor and supports the pedals firmly.

When moving the instrument, always adjust or

remove the pedal support bolt, then readjustTurn the bolt when the instrument is in its new position.

92

Page 92
Image 92
Kawai CA63 Connecting the pedal and power cables, Attaching the headphone hook optional, Adjusting the pedal support bolt