Kenmore 385. 17624, 385. 17620 Pressure Adjusting Lever, Presser Foot Lifter, Thread Cutter

Pressure Adjusting Lever

Pressure adjusting lever

The pressure adjusting lever should be set at "3" for regular sewing.

Reduce pressure to "2" for applique, cut work, draw work and basting.

Set pressure at "1" when sewing chiffon, lace, organdy and other fine fabrics. Velour and knits with a lot of stretch may also require pressure at "1".

Presser Foot Lifter

Presser foot lifter

Normal up position

Highest position

The presser foot lifter raises and lowers your presser foot.

You can raise it about 1/4" ( 0.6 cm ) higher than the normal up position for easy removal of the presser foot or to help you place heavy fabric under the foot.

Thread Cutter

Thread cutter

You do not need a pair of scissors to cut threads after sewing. Just use the built-in thread cutter.

Extension	Table	\
Detaching	the table :

Pull the table away from the machine, as illustrated.

Attaching the table:

Push the extension table until it snaps into the machine.

OExtension table Projection Hole

Accessory Box :

Open the cover of the accessory box toward you.

Sewing accessories are conveniently located in the box.

". _ ','

J