Bar Tacking

Stitch

width:

2 to

6.5

Stitch

length:

0.5

to 1

Needle

thread tension:

2 to 6

(_ Presser foot A:

Zigzag foot

This is similar to a very short satin stitch and is used to reinforce points of strain such as corners, pockets and straps of lingerie.

Sew four (4) to six (6) stitches.

Embroidery

 

Stitch

width:

1 to

6.5

(_

Stitch

length:

Any

 

 

Needle

thread tension:

2 to

6

(_

Presser foot:

Removed

 

Feed dogs:

Dropped

Drop the feed dog and remove the foot holder. Adjust stitch width as desired. Draw a design onto the fabric with tailor's chalk. Stretch the fabric between embroidery hoops and place under the needle.

Lower the presser foot lifter to engage the needle thread tension. Holding the needle thread in your

left hand, rotate the handwheel counterclockwise for one complete turn.

Pull the needle thread to draw the bobbin thread to the right side of the fabric. At medium speed, stitch along the marked outline, guiding the fabric carefully by hand. After embroidery is completed, raise the feed dogs for normal sewing.

_ WIDTH

[_ LENGTH (_)

®

_ WIDTH (_)

[_ LENGTH (_)

®

.(,,=,

52

Page 59 Page 61
Page 60
Image 60
Kenmore 385. 17624, 385. 17620 owner manual Bar Tacking, Embroidery
Page 59 Page 61
Top Page Image Contents