IHSTALLIHG

riNGTHEDOOflS

ANDHINGES

Some installationsrequire doer removal
to get refrigeratorto final location.
Toavoid Severe pers0nai i or
' Discon
i
attached
Toavoid propertydamage,observe
protectivematerial, prior to moving
refrigerator.
> To avoiddamage or breakage to
adjustingbolt, do notuse power
toolsto correct leveling.
> DO NOT adjust refrigerator to be
any shorter than 68Y2tall (minus
hingeand cap). Doing so may
damage undersidecomponents.
1. Remove toe grille andbottom hinge
covers.
> Open both doors 180 degrees, or
as wide as possibleto remove.
2. While pinching white collar (A) to the
blueconnector (B), pull waterline
fromconnector.
B
IMPORTANT:When reconnecting water
line, cut off tubing at first available
scoredline beforeinserting into
connectorcollar.
3. Removetop hinge cover by removing
Phillipsscrew.
4. Close doors.
5. Unscrew %6"hex head screws from
top hinges.
• DO NOT remove either green
groundwire or wire connecting
centerscrew.
6. Detach main wire connectorharness
and red wire harness.
> Todetach main wire harness, use
a flat blade screwdriver or finger-
nailto press junction point
betweentwo connectorsto
release.
> Todetach red wire harness,press
tab on undersideof connector to
release.
7. Remove top hinges along with doors.
8. Remove bottom hinges with a ¾" hex
headdriver.

16THEDOORS

> To replace the doors, follow the steps
in Removing the Doors and Hinges
in reverseorder.
IMPORTANT: When reconnectingwater
line, cut off tubing at first available
scored line before inserting into
connector collar.
8