TERIORSHELVES

>- Hande tempered glass shelves
carefully.Shelvesmay break
suddenly if nicked;scratched, or
expOsedto suddentemperature
change.
SPILLPROOF SHELVES
SpillproofShelves hold , _
simplespills for easier _ n
cleaning.
Toremove shelves, lift 'I_11 II
up and out.
Toinstall shelves, reverseabove
procedure.
SpillproofSlide-out
Shelvesfeature the
convenienceof
easycleaning
witha pullout "" '_ _III
design to reach
items in the back.For ease of cleaning,
glass shelf may be removed by pulling
to full extension and lifting out of frame.

STORAGE

BEVERAGE
COMPARTMENT
(SOME MODELS)
Thetemperature-controlledbeverage
compartmentkeepsbeveragesand
other items colder than the rest of the
fresh food section. Air inlet allows air
fromthe freezer section to pass to the
beveragecompartment.
Controls
The control is located on the left wall of
the fresh food section. Control adjusts
amount of air circulating in the beverage
compartment.Turn control clockwise for
colder temperature.
To remove and install the beverage
compartment:
Iflocated directly abovethe beverage
compartment, dairy center or door
bucket may need to be removed.
Referto appropriate instructions and
removeitem.
Slidethe
beverage
compartment
assemblyup
and pull
straight out.
To install,align one ofthe cold air
intakeholes (A) withone of the two
air inlets (B) in door liner.Push
assemblydown onto door liner
retainer until it stops.
IMPORTANT: The beverage
compartment will not operate properly if
air intake holes are notaligned with air
inlet in door liner.
DAIRY CENTER
The Dairy Center providesconvenient
storagefor itemssuch as butter, yogurt,
cheese, etc.
This compartment is an adjustable
feature located in the door. It can be
movedto several different locations to
accommodatestorage needs.
To remove and install bin:
Toremove,
slide dairy
centerup and
pull out.
Toinstall, slide
assembly in
above desired door liner retainer and
push down until it stops.
To remove and install dairy door:
To remove, press in sides of dairy
doorand pullout.
Toinstall, slide sides of dairy door
inside dairy center until hinge points
snap into place.
TILT-OUT DOOR BUCKETS
(SOME MODELS)
TheTilt-Out Bucketassemblyconsists
ofa bucket and frame, providing
adjustable,convenientstorage for food
itemsin door.The bucketassemblytilts
forward for easyaccessof items,and
lifts out for ease in cleaning and
adjusting.
To remove and install bucket:
To remove
bucket,tip bucket
forward and pull
straight out to
remove.
I11
Toinstall bucket, slide bucket into
bucket frame and push bucket
upright.
To adjust bucket frame:
Remove bucket per ">Y_I I1|11
above instructions.
Liftframe offdoor
support and place in
desired door location.
DOOR BUCKETS
Door Buckets adjust tomeet individual
storageneeds.
To remove, slide bucket
upand pullstraight out.
To install,
reverse above
procedure.
]5