into place
when d6or handlesare remove&
property
following:
> Refrigerator panelsshould not
weigh more than
kilograms)and fr_
should not weigh
pounds(7 kilogra
> Protect soft vinyl
with cardboard, n
protectivematerial.
> Protect hands and arms by
wearing gloves.
NOTE:
> To protect door surfaces from being
scratched,cover back edges of
decoratorpanels by placing masking
tape along back edges.
>- Save all screws andreuse in original
locations.
Y4"(6mm) Panel Dimensions
Extended
Door
Panel
Fresh food
door
Upper
dispensing
freezer door
Lower
dispensing
freezer door
Non-
dispensing
freezer door
Panel Panel
Height Width
66 T'4" 18 _'A6"
(169.5 cm) (48.1cm)
18 1/8" 13 _sAs"
(46 cm) (36.4cm)
32 %2" 13 1_/i,"
(61.5cm) (35.4 crn)
66 ¾" 13 1_,6"
(169.5 cm) (35.4 cm)
INSTALLING PANELS
1. Removetoptrimscrews with a
Phillips screwdriverand remove top
trim.
.
,
.
,
.
Slidehandle upwarduntil
loose. Removehandle
fromdoor.
Removedoor
retainerclips with
a ¼"hex head
driver.
Slidebottom of panels into bottom
doortrim untilhinge side of decorator
panelrests under hinge side trim.
REMOVING PANELS
1. Remove top trim screws with a
Phillipsscrewdriver and remove top
trim.
.
.
IMPORTANT:Tapetops ofpanels to 4.
doorto preventpanels from falling.
Reinstalldoor r__ 5.
retainerclips with
a¼" hex head
driver.
Reinstallhandle by inserting retaining
clipson door into notches on back of
handle.
IMPORTANT:Tape tops of panels to
door to prevent panels from falling.
> Slide handle down until it contacts
bottomtrim.
7. Remove tape from
topsof panels
beforereinstalling
top door trim with
Phillipsscrews
removedin step 1.
Slidehandle upward until
loose. Removehandle
from door.
Removedoor
retainerclips with
a ¼" hex head
driver.
Removetape to slide panels out of
doortrim.
Referto steps 5, 6 and7 of
Installing Panels to install handles
andtrim.
m
9