AUTOMATICICEMAKER
Toavoidpropertydamage, observe
thefollowing:
> DO NOTforceice maker arm
down or up....
>DO NOTplace or store anything in
tce storagebin.
Thisice makercreates the ice used in
thedispensingsystem.
UsingleeMaker for the FirstTime
> Confirm ice bin isin
placeand ice maker
arm is down.
> After freezer section reaches
between0° to 2°F (-18° to -17° C),
ice makerfills with water andbegins
operating.
> Allow approximately 24 hoursafter
installationto receive first harvest of
ice.
> Discard ice created within first 12
hoursof operationto verify system is
flushedof impurities.
OperatingInstructions
> Confirm ice bin is in placeand ice
makerarm is down.
> Afterfreezer section reaches 0 °to
2°F (-18° to -17° C), ice maker fills
with water and begins operating. You
will have a complete harvest of ice
approximatelyevery 3 hours.
> Stopice production
by raising ice maker
arm until click is
heard.
> Icemaker will remainin the off
position until arm is pusheddown.
IMPORTANT: Ice Cream Shelf should
notbe installed if ice maker arm is in
"off"position.
FREEZER SHELF
To remove and install ._-_ A
clip-mounted
shelves:
>Toremove, pull shelf from wall
mountingclipsandpull left side of
shelf out of wall mounting holes.
> To install,place shelf in mounting hole
andattach to wall mounting clips.
To remove and install rail-mounted
shelves: _!
>To remove, snap
r,0 ts,deo,s,e, t,,/from cabinet railing
and remove from wall mounting clips.
To install, replace shelf in wall
mounting clips. Be sure back edge of
shelf is flushwith back of cabinet and
snap shelf into cabinet railing.
ICE CREAM SHELF
Ice Cream Shelf
provides a space for
items to be chilled or
frozen quickly.
> To remove, lift icecream shelf from
ice bin rails and pull straight out.
> To install, fit shelf over topof ice
makerand loweronto ice bucket rails.
IMPORTANT: Ice Cream Shelf should
not be installed if ice maker arm is in
"off" position.
To: a_oid p_ssi:b!e inju_i :including
deathi do not place g!ass items inice
Cream shelf: Glass objects may
shatter or explode if exposed to
extreme €old:
STORAG[DR#qEB
FREEZER BASKET
To remove and install
basket:
> To remove, lift
frontof basket
andpull outto its full extension.
Liftupfront ofbasket and remove.
> To install, slide basket into rails at
bottom offreezer section. Liftup front
of basket,and slideto the back of
refrigerator.
ICE STORAGE BIN
TheIce Storage
Bin is locatedbelow
the automatic
dispensingice
maker.
To
II'1
_rage
removeand installice storage bin:
To remove bin, remove ice cream
shelf.
Raiseice maker arm to deactivate ice
maker. Lift front of bin and pullout to
its full extension. Lift up front ofbin
and remove.
Toinstall, slide bininto rails below ice
maker until bin locks into place. Drop
ice maker arm to activate ice maker,
and replace ice cream shelf.
IMPORTANT: Icebin must be lockedin
proper place for }_ ___
proper ice
dispensing. If
freezerdoor
does not close, bin is notin proper
location. Turn auger driver
counterclockwise (as shown) to properly
align ice bin with back of refrigerator.
STORAGE
ADJUSTABLE DOOR
BUCKETS
Door Buckets adjust to meet individual
storage needs.
To remove buckets:
Lift the door bucket up until
it clears the retainers on the
door liner, then pull the
door bucket _
straight out.
To reinstall buckets:
> Slide bucket in above desired door
liner retainer and push down until
bucket stops. 17