STARTING/CANCELING A FUNCTION

After setting a function, you must press START/ ENTER to start the function. If you do not press START/ENTER within 5 seconds of setting, "START?" will show on the

display as a reminder. If you do not press START/ENTER within 5 minutes of setting, the time of day will appear. You must reset the function and press START/ENTER.

OFF/CANCEL will cancel any function except the

I

_

Clock, Timer, or Oven/Cooktop

Lockouts.

_

When you press OFF/CANCEL,

the display

i

 

will show

the time of day or, if the minute

i

timer

is also being

used, the time remaining.

I

ULTRABAKE TM BAKING/ROASTING

Your oven is designed with the ULTRABAKE TM enhanced baking system to constantly monitor oven temperature. The bake burner will cycle, as needed, to maintain the desired temperature. This feature is automatically activated when the oven is in operation.

1, Place the STURDIGLIDE TM rack(s) where you

need them in the oven. For more information, see the "Positioning racks and pans" section, p. 9.

2.Press BAKE.

3.Set the temperature (optional).

Do this step if you want to set a temperature other than 350°F. Press TEMP (A) or (T) ped(s) to raise or lower the temperature in 5°F amounts. Use these pads until the desired temperature shows on the small display.

IMPORTANT: Do not try to light the oven burner

during a power failure. Never place food or cookware directly on the oven door or the oven bottom.

PRESS

YOU SEE

PRESS

YOU SEE

TEMP

(example for bake at 375°F)

m

15

Page 15
Image 15
Kenmore 665.75837, 665.75839, 665.75832 manual STARTING/CANCELING a Function, Example for bake at 375F