USING THE WARM & READY WARMING DRAWER (contd.)

Toremove the warmingdrawer:

Remove all items from inside the warming drawer and allow the unit to cool completely before attempting to remove the drawer.

1.Pull drawer to its futt open position.

2.Locate'the black triangle tabs on each side of the drawer.

3.Press the tab DOWN on the RIGHT side and lift the tab UP on the LEFT side at the same time. Then pull drawer out another inch.

Tor_placeth_ warmingdrawer:

1.Align the drawer glides with the receiving guides.

2.Push drawer in completely.

3.Gently open and close drawer to ensure it is seated properly on the slides.

4.Carefully pull the drawer all the way out holding on to the sides, not the drawer front.

THE OVEN VENT

Hot air and moisture escape from the oven through

Oven vent

a vent that is near the middle of the backguard. The

 

vent lets air circulate properly. Be careful not to

 

block the vent, or you will get poor baking/roasting

 

results.

 

NOTE: Never store plastics, paper, or other items

 

that could melt or burn near the oven vent, or any

 

of the surface burners.

 

26

Page 26
Image 26
Kenmore 665.75832, 665.75837, 665.75839 manual Oven Vent, Torplaceth warmingdrawer