USING THE TIMED OVEN CONTROL (contd.)

5, Set the cook time.

PRESS

YOU SEE

Press the HOUR/MIN (A) or (V) pad(s) until the

HOUR

MIN

 

 

correct cook time shows on the display.

 

 

(example shows 30-minute baking/roasting time)

6. Press START/ENTER.

PRESS

YOU SEE

NOTES:

You can change the temperature or time

settings any time after pressing START/ENTER by repeating Steps 3 or 5. You do not have to press START/ENTER again.

The display will count down the baking/ roasting time in hours and minutes (if cook time is more than 1 hour) or in minutes and seconds (if cook time is less than 1 hour).

(display counts down cook time)

7, When cook time ends the oven will automatically shut off. End and COOK TIME will show in the

display. You will hear four tones then four 1-second repeater tones every minute.

8. Press OFF/CANCEL to stop repeater tones

PRESS

and remove

End from display and bring back the

 

time of day.

 

 

NOTE: You can do this step any time to cancel

the Timed Oven control setting.

YOU SEE

YOU SEE

(time of day)

ToprogramCOOKTiMEand DELAYSTART:

IMPORTANT: If you program DELAY START without programming COOK TIME, the oven will start at the programmed time, but will NOT stop until you press OFF/CANCEL.

1.Place the STURDIGLIDE TM rack(s) where you need them and put your food in the oven. To place your racks correctly, see "Positioning racks and pans" section, p. 9.

2. Press BAKE.

PRESS

YOU SEE

BAKE

22

Page 22
Image 22
Kenmore 665.75839, 665.75837, 665.75832 manual Using the Timed Oven Control contd, ToprogramCOOKTiMEand Delaystart