Kenmore 665.95822, 665.95824, 665.95829 USING THE SURFACE COOKING ZONES contd, ON indicator light

Models: 665.95829 665.95824 665.95822

1 50
Download 50 pages 57.58 Kb
Page 9
Image 9
USING THE SURFACE COOKING ZONES (contd.)

USING THE SURFACE COOKING ZONES (contd.)

Use the STEADYTEMP warming zone to keep cooked foods warm. It is not recommended for heating cold foods. Choose the MIN setting for heat-sensitive and smaller quantities of food. Choose the MAX setting for liquids and larger quantities of food. Adjust as needed.

TO set the STEADYTEMP warming zone:

1.Push in and turn the control knob to the desired setting from MIN to MAX for different levels of heating.

2.Turn the knob to OFF when finished. The

STEADYTEMP warming zone will remain warm until the hot surface indicator light on the control panel goes off.

Cover all foods with a lid or aluminum foil. Do not use plastic wrap to cover food because it may melt onto the cooktop surface. When warming baked goods, allow a small opening in the cover for moisture to escape.

Use only cookware and dishes recommended for oven and cooktop use.

Use potholders or oven mitts to remove cookware.

The STEADYTEMP warming zone will not glow red when it is on, unlike the surface cooking zones. However, the surface indicator light on the control panel will glow.

Cookware and dishes should have a flat bottom to make direct contact with the cooktop surface.

STEADY'FEMP

EASYGLANCE TM

hot

control knob

surface

indicator

lights

......

_

8_

 

COOKTOP ON indicator light

STEADYTEMP warming zone

The STEADYTEMP warming zone may be used

whether the other surface cooking zones are in use or not.

Food quality may deteriorate if it is kept on the STEADYTEMP warming zone for an extended period of time.

For best results, hold food no longer than 30 to 45 minutes.

The hot surface indicator light above the control knob will glow when the cooking zone controlled by that knob becomes too hot to touch. The indicator light will continue to glow as long as the cooking zone is too hot to touch, even after the surface cooking zone is turned off.

The COOKTOP ON indicator light on the right of the control panel will glow when any surface control knob is turned on.

The indicator light will go off when all control knobs have been turned off, even when one or more cooking zones are still hot.

8o_ Hot surface

ON

indicator light

®@

COOKTOP ON indicator light

9

Page 9
Image 9
Kenmore 665.95822, 665.95824, 665.95829 manual USING THE SURFACE COOKING ZONES contd, ON indicator light