USING THE WARM & READY WARMING DRAWER (contd.)

Remove all items from inside the warming drawer and allow the unit to cool compretely before attempting to remove the drawer.

1.Pull drawer to its full open position.

2.Locate the black triangle tabs on each side of the drawer.

Tab ¸_¸ •

1.Align the drawer glides with the receiving guides.

2, Push drawer in completely.

3.Gently open and close drawer to ensure it is seated properly on the slides.

3.Press the tab DOWN on the RIGHT side and lift the tab UP on the LEFT side at the same time. Then pull drawer out another inch.

4, Carefully pull the drawer all the way out holding on to the sides, not the drawer front.

THE OVEN VENT

Hot air and moisture escape from the oven through

vent

a vent on the backguard below the control panel. The

 

vent lets air circulate properly. Be careful not to

 

block the vent, or you will get poor baking/roasting

 

results.

 

NOTE: Never store plastics, paper, or other items

 

that could melt or burn near the oven vent, or any

 

of the surface cooking zones.

 

36

Page 36
Image 36
Kenmore 665.95822, 665.95824, 665.95829 manual Using the Warm & Ready Warming Drawer contd, Oven Vent