USING THE TIMED OVEN CONTROL (contd.)

7. When cook time ends the oven will automatically

 

YOU

SEE

shut off. End and COOK TIME will show in the

 

 

 

display. You will hear four tones then four

 

 

 

1-second repeater tones every minute.

 

 

 

8. Press OFF/CANCEL to stop repeater tones

PRESS

YOU

SEE

and remove End from display and bring back

 

 

 

the time of day.

__0FF

 

 

 

CANCEL

 

 

NOTE: You can do this step any time to cancel

 

 

 

the Timed Oven control setting.

 

 

 

 

 

(time

of day)

IMPORTANT: If you program DELAY START without programming COOK TIME, the oven will start at the programmed time, but will NOT stop until you press OFF/CANCEL.

1.Place the STURDIGLIDE TM rack(s) where you need them and put your food in the oven. To place your racks correctly, see "Positioning racks and pans" section, p. 12.

2.Press BAKE.

3.Set the temperature (optional).

Do this step if you want to set a temperature other than 350°F. Press the TEMP (A) or _ pad(s) to raise or lower the temperature in 5°F amounts. Use these pads until the temperature you want shows on the small display.

4.Press COOK TIME.

5.Set the cook time.

Press the HOUR/MIN (A) or (V) pad(s) until the correct cook time shows on the display.

PRESS

YOU SEE

BAKE

PRESS

YOU

SEE

TEMP

 

 

J_,

 

 

 

(example shows bake at 375°F

PRESS

YOU

SEE

COOK

 

 

TIME

 

 

PRESS

YOU

SEE

HOUR

MIN

 

(example shows 30-minute baking/roasting time)

32

Page 32
Image 32
Kenmore 665.95829, 665.95822, 665.95824 manual Time Day, Press YOU see Bake See Temp, Press YOU See Cook Time