SETTING THE CONTROLS

5, Press any pad to remove "End" and bring back

YOU SEE

time of day; or open door, at which time "door"

 

 

will be displayed. Then close door and time of

 

 

day will appear in display window.

 

 

 

(when

pressing arty pad)

 

YOU

SEE

(when opening the door)

6.After the oven is cool, wipe off any residue or ash with a damp cloth or sponge. If needed, touch up spots with a mild abrasive cleanser or cleaning sponge.

1, Press SENS-A-CLEAN.

SEnS setting will automatically determine the length of cleaning time. Maximum clean time is 4'/2hours and minimum is 2 hours.

NOTE" Make sure the clock is set to the correct time of day. (See "Setting the clock" in the "Using Your Range" section, p. 15.)

PRESS

YOU SEE

2.(Optional) If you would prefer to set the soil level PRESS yourself, you can set Light, Average or Heavy soil.

You can scroll through all 4 settings (SEnS, SoilL, SoilA, and Soi_H) continuously by pressiqg the SENS-A-CLEAN keypad.

Press SENS-A-CLEAN twice, SoilL (for light soils) wil_ appear on the display.

Press SENS-A-CLEAN three times, SoilA (for average soils) will appear on the display.

Press SENS-A-CLEAN four times, SoilH (for heavy soils) will appear on the display.

SoilL will clean for approximately 2-21/2hours, SoilA for 3-3'/2hours, and SoilH for 4-4'/_hours.

3. Press DELAY START.

PRESS

lYB.AY

STARt

4. Set the start time.

PRESS

Press the HOUR/MIN (&) or (V) pad(s) until the

HOUR MIN

 

desired time of day to start the SENS-A-CLEAN

 

Self-Cleaning cycle shows on the display.

 

 

__

YOU SEE

(example shows light soil setting)

YOU SEE

YOU SEE

(example for 12:30 start time)

continued on next page 39

Page 39
Image 39
Kenmore 665.95822, 665.95824 manual Press any pad to remove End and bring back, When opening the door, Press Delay Start