REMOVING THE OVEN DOOR
For normal use of your range, you do not need to
remove the door. However, if you find it necessary Door removal Door stop clip
to remove the door, follow the instructions in this pin hole section.
NOTE; The oven door is heavy.
Before removing the door:
1.Use a putty knife or screwdriver and insert it at the bottom corner of the door stop clip.
2. Pry door stop clip free and remove from front frame hinge slot. Take care not to scratch porcelain.
3. Repeat procedure for other door stop clip.
Range
Hinge Front frame
hanger hinge slot
1; Open the oven door. Insert door removal pins, included with your range, into both hinge hangers. Do not remove the pins while the door is removed
from the range.
2.Carefully close the door until it rests against the door removal pins.
NOTE: The door removal pins you inserted must still be in both door hinges.
1.Grasp the door on the sides with your fingers
on the front of the door and your thumbs on the inside surface.
3.Grasp the door on the sides with your fingers on the front of the door and your thumbs on the inside surface.
4.Pull door straight up, then toward you. Hinge hangers will slide out of front frame hinge slot.
continued on next page
43
