TEMPERATURE CONTROLLED "HI-POWER" COOKING AND AUTOMATIC "HOLD WARM"

The "Temperature Control Meat Cooking Guide" and "Reheating

power setting and doneness temperature are recommended

temperature control settings, the timer is not used.

. Place the temperature probe into the food with the first inch of the sensor in the center of the food. Adjust the

length of the temperature probe by sliding the grom- met before inserting it into food so that the sensitive

area of the probe can always be placed in the center of the meat. The

probe should be in a

angle as shown. It should not be put in from the top.

Guide" on Pages 15 and 16 will show you which multi-

for the food you are cooking. When cooking with the

NOTE: It is not necessary to touch COOK CONTROL when you are cooking with "HI (MAX POWER)". How-

ever, if you touch COOK CONTROL the light above COOK will go on and the word "HI" will show in the display window. This is to remind you that the oven will work at "HI (MAX POWER)" unless a different power setting is chosen.

6,, Touch START. The oven will begin to cook and you will be

able to see the temperature of

the food rising in the display window.

A tone will sound for one

second when the desired

temperature is reached.

. Plug the temperature probe into the socket on the side of the oven.

Caution: Do not plug

the pointed end of the

temperature probe into the socket.

3. Touch CLEAR.

®

4. Touch TEMP CONTROL. The lights above TEMP and below STAGE I will go on, and "F"

will show in the display win- dow.

. Choose the food temperature and touch the corresponding

numbers. For example, if the

recipe calls for doneness at

120°F, you would touch the

numbers "'1", "2" and "0".

When you touch "120" the

display window will show

"I20F". If the temperature

probe is not plugged into the

socket, the probe light will flash and the oven will not work.

, The oven will switch into

"Hold Warm" to keep the food warm. "Hold" will show

in the display window. The

cook control setting changes

to "10 (WARM)". To check

the temperature being held, touch TEMP CONTROL.

The "holding" temperature

_11 show in the display win-

dow. The "Hold Warm" will

continue for 60 minutes after

the food reaches the chosen

temperature or until the door

has been opened or until STOP has been touched. If the

door is opened, the "Hold Warm" will stop. To reset, sim- ply touch TEMP CONTROL,

the corresponding numbers and START.

NOTE: The highest temperature

to which the food may be set is

200°F. The temperature is dis- played in I°F increment.

Kenrnore _:'._ EM^_,-n:J_

,&ulo P,e_'ipe 300

11 i

17

Page 17
Image 17
Kenmore 85941 manual Kenrnore . EM,-nJ