PRESET RECIPE COOKING
Auto Recipe 300 plus 3 Customer Programmable Recipes
300 recipes shown in the cookbook have been stored in this oven. By touching the recipe number corresponding to preset recipe, cooking can be done. These 300 recipes have been preset, so you can not erase or substitute them.
You can program 3 more favorite recipes in Recipes #
•To cook one of 303 preset recipes, simply follow the steps below.
I.Touch CLEAR.
2.Touch RECIPE #.
"0" will show in the display window.
3.Touch the correct numbers of Recipe found in your
Kenmore Microwave Cookbook.
Example: If you cook "French Onion Soup of Recipe #
25", touch "2" and then "5". The display window shows "25".
Note: When you touch the numbers of Recipe # 301- 303, the display window may flash, it means that no preset recipe has been stored in the oven for that recipe number.
Example: French Onion Soup of Recipe #25
The following program has been stored into the oven.
(Stage I; HI, 6 minutes) (PAUSE)
(Stage 2, HI, 6 minutes) (PAUSE) (Stage 3; HI, I minute) (PAUSE) (Stage 4; HI, 8 minutes)
1.Touch RECIPE #, "2" and "5". The light at the right of RECIPE
in the display window will go
on, "25" will show in the display window.
---25 I
Kenmom__'_ _,Sn'ER
AUtO Recipe
NNNF 9F 9F' 9
r- c-g-lr- l
_l! ..... II _ I
F=-lr=n
4.Touch START
The oven.will begin cooking, and the display window will show the time counting down.
Some preset cookings of "AUTO RECIPE 300" can cook up to 4th stage.
Notes:
elf "PAUSE" shows in the display window between
stages, a special requirement (i.e. stirring, turning over,
rotating and covering by following instructions in the
cookbook) is needed.
olf "PAUSE" does not show in the display window, cooking in the stage cooking will start itself or the cook- ing has been completed.
2., Touch START.
The first stage will begin. The
light below STAGE I will go on
and "600" will show in the
display window. The oven will begin to cook at "HI" power level and the time will begin to
Kenmomse.,c::.,_,_-._J_
AUlO Recipe 3OO
c2Bc-g-lr-gn
3. "PAUSE" will show in the display window.
At pause, stir by following the
instructions in the cookbook.
.%UIO Rt_t'lpt = 300
==,d_ S====
29