•Stirrer shield
The oven inside top (stirrer shield) can be gently wiped in place or :removed for washing at the sink. It rests in slots along the sides and in the rear of the oven and is held by three tabs in front.
Carefully pull the front edge down and forward to remove. Wash only in warm (not hot) detergent
water, rinse, and wipe dry. Avoid hitting or bending the metal stirrer blades, as this could cause uneven
cooking or damage to the oven.
To replace shield, slide it into the side and rear slots with
• Exhaust filters
The two mesh exhaust filters on the hood bottom cover can be removed for washing in a sink.
The filters are held by metal springs in the center of the hood bottom cover. To remove it, place a finger
in the finger recess of the hood bottom cover and push it toward the center and pull down. Wash only in
warm detergent water, rinse and wipe dry.
Do not use ammonia for aluminum mesh filters. Do not run the hood fan without the filters.
34
