IMPORTANT SAFETY
INSTRUCTIONS
Your sewing machine is designed and constructed only for HOUSEHOLD use.
Read all instructions before using this sewing machine.
DANGER-To reduce the risk of electric shock:
1. A sewing machine should never be left unattended when plugged in.Always
unplug this sewing machine from the electric outlet immediately after using
andbefore cleaning,
2. Always unplugbefore replacing sewing machine bulb. Replace bulb with
same type rated 15Watts.
3. Do not reach for a sewing machine that has fallen into water. Unplug
immediately.
4, Do not place orstoresewing machine whereit canfall or be pulledintoa tub
orsink. Do notplace or dropinto water orother liquid.
WAR NING -To reduce the riskof burns, fire, electric shock, or injury
to persons.
1. Do not allow to be used as a toy. Close attention is necessary when this
sewing machine is used by ornear children.
2. Use this sewing machine only for itsintended use as described in this manual.
Use only attachments recommended by the manufacturer as contained in
this manual.
3. Never operate this sewing machine ifit has adamaged cordor plug, ifit is not
working properly, if it has been dropped or damaged, or dropped into water.
Return the sewing machineto the nearest authorized dealer orservice centerfor
examination, repair, electrical or mechanical adjustment.
4. Never operatethe sewing machine with any airopening blocked. Keepventilation
openings of the sewing machine and foot controller free from accumulation
oflint, dust, and loose cloth.
5. Never drop or insert any object into any opening.
6. Do not use outdoors.
7. Do not operate where aerosol (spray) products are being used or where
oxygen is being administered.
8. To disconnect, turn all controls to the off ("0-) position, then remove plug
from outlet.
9. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
10. Keep fingers away from all moving parts. Special care is required around
these_ngrnacl_neneedte. _ _ _
1t. Always use the proper needle plate. _e wrong plate can cause the needle
to break.
12. Do not use bent needles.
13. Do net pull or push fabric while stitching. It may deflect the needle causing it
to break.
14. Switch the sewing machine off ("0") when making any adjustment in the
needle area, such asthreading needle, changing needle, threading bobbin,
or changing presser foot, and the like.
15. Always unplug the sewing machine from the electrical outlet when
removing covers, lubricating, or when making any other adjustments
mentioned inthe instruction manual.