Getting Started
qSwitch the Power ON.
Switch the transceiver power ON by turning the Power switch/ Volume control clockwise.
•A confirmation tone sounds, the LCD lights up momentarily, then the current channel number is displayed.
To switch the transceiver power OFF, turn the Power switch/ Volume control fully counterclockwise, until a click sounds.
wAdjust the Volume.
Set your desired volume level by rotating the Power switch/ Volume control.
•Clockwise increases the volume and counterclockwise decreases the volume.
Note: To adjust the volume using background noise as a reference, use the Monitor function {page 19}.
eSelect a Channel.
Select a channel by pressing the 
or 
keys.
•A confirmation tone sounds each time you press the 
or 
key.
13
