nReceiving a Selcall
When a selcall is received, the 
icon appears on the display along with the ID of the caller.
Press the PTT switch and speak into the speaker area to respond to the call, then continue the call as normal. When the call is finished, press the CAL key to return to operating mode.
nData Transmit Modulation Delay Time
To set up a data transmit modulation delay time:
1With the transceiver power OFF, press and hold the MENU key while turning the transceiver power ON (for 1 second).
2Press the 
or 
key to select “ 
”.
3Press the MENU key then press 
or 
to select
“ 
” (0 ms), “ 
” (500 ms), “ 
” (1000 ms),
“ 
” (1500 ms), or “ 
” (2000 ms).
4Press the MENU key to exit the selection.
5Press the PTT, MON, or CAL key to exit Setting Mode.
29
