Kenwood TK-3230 instruction manual Press the PTT switch to transmit the selected selcall ID

Selcall (Selective Calling)

A Selcall is a voice call to a particular station or group of stations. Each transceiver is set up with an individual ID number for use with selcalls.

nMaking a Selcall

1Press the CAL key.

2Press the or key to select an ID number.

•“  ” represents a single station, “  ” represents a group of stations, and “  ” represents all stations.

3Press the PTT switch to transmit the selected selcall ID.

•The transceiver waits for the Data Transmit Modulation Delay time {page 29} before transmitting the selcall ID.

•The side tone sounds if PTT ID side tone {page 30} is enabled.

4Release the PTT switch to end transmission.

5Press the CAL key to return to operating mode.

Note: If Optional Signaling (menu “  ”) has been set to “  ” (FleetSync), you can also set up an Individual Selcall Alert type (menu “  ”) and Group Selcall Alert type (menu “  ”). Individual and Group Selcall Alert types range from “   ” (off) and “   ” (type 1) to “   ” (type 10). Refer to the menu list on page 46.

28