Channel frequency setup
You can change the default frequency of each channel:
1With the transceiver power OFF, press and hold the MENU key (for approximately 1 second) while turning the transceiver ON.
2Press the 
or 
key to select a channel.
•The current frequency list number appears beside the channel number.
3Press the MENU key then press 
or 
to select the frequency list number for the channel.
•Refer to page 50 for the frequencies available for each channel.
4Press the MENU key to exit the selection, then repeat steps 2 and 3 to set additional channels.
5Press the PTT, MON, or CAL key to exit Setting Mode.
15
