MAINTENANCE
GENERAL INFORMATION
Your transceiver has been factory aligned and tested to specification before shipment. Under normal circumstances, the transceiver will operate in accordance with these operating instructions. All adjustable trimmers, coils and resistors in the transceiver were preset at the factory. They should only be readjusted by a qualified technician who is familiar with this transceiver and has the necessary test equipment. Attempting service or alignment without factory authorization can void the transceiver warranty.
When operated properly, the transceiver will provide years of service and enjoyment without requiring further realignment. The information in this section gives some general service procedures requiring little or no test equipment.
SERVICE
If it is ever necessary to return the equipment to your dealer or service center for repair, pack the transceiver in its original box and packing material. Include a full description of the problems experienced. Include both your telephone number and fax number (if available) along with your name and address in case the service technician needs to call for further explanation while investigating your problem. DonÕt return accessory items unless you feel they are directly related to the service problem.
You may return your transceiver for service to the authorized KENWOOD Dealer from whom you purchased it or any authorized KENWOOD service center. A copy of the service report will be returned with the transceiver. Please do not send subassemblies or printed circuit boards. Send the complete transceiver.
Tag all returned items with your name and call sign for identification. Please mention the model and serial number of the transceiver in any communication regarding the problem.
SERVICE NOTE
Dear YL/OM,
If you desire to correspond on a technical or operational problem, please make your note short, complete, and to the point. Help us help you by providing the following:
1Model and serial number of equipment
2Question or problem you are having
3Other equipment in your station pertaining to the problem
4Meter readings
5Other related information (Menu setup, mode, frequency, button sequence to induce malfunction, etc.)
CAUTION: Do not pack the equipment in crushed newspapers for shipment! Extensive damage may result during rough handling or shipping.
Note:
◆Record the date of purchase, serial number and dealer from whom the transceiver was purchased.
◆For your own information, retain a written record of any maintenance performed on the transceiver.
◆When claiming warranty service, please include a photocopy of the bill of sale, or other
CLEANING
The buttons, controls and case of the transceiver are likely to become soiled after extended use. Remove the controls from the transceiver and clean them with a neutral detergent and warm water. Use a neutral detergent (no strong chemicals) and a damp cloth to clean the case.
69
