KitchenAid KSB570, KSB560 Troubleshooting, Blender does not operate when a setting is selected

Troubleshooting

The blender does not operate when a setting is selected:

No indicator lights are lit.

Check to see if the blender is plugged into a grounded 3 prong outlet. If it is, press OFF, then unplug the blender. Plug it back in to the same outlet. If the blender still does not work, check the fuse or circuit breaker on the electrical circuit the blender is connected to and make sure the circuit is closed.

ENGLISH

The blender stops while blending:

	The blender may be overloaded. If the
	blender becomes overloaded when
	blending heavy ingredients, it will
	automatically shut off to avoid damage
	to the motor. Press OFF to reset the
	blender. Remove the jar from the base
	and divide the jar contents into smaller
All indicator lights are flashing	batches. Adding liquid to the jar may
	also reduce the load on the blender.
at the same time.

The blender may be jammed. If it’s

jammed, the blender will stop running

to avoid damage to the motor. Press OFF

to reset the blender. Remove the pitcher

from the base and free the blades by

breaking up or removing the contents at

the bottom of the jar. Indicator lights are flashing alternately.

If the problem cannot be fixed with the steps provided in this section, then contact KitchenAid or an authorized service center.

U.S.A./Puerto Rico: 1-800-541-6390

Canada:

1-800-807-6777

Mexico:

01-800-024-17-17 (JV Distribuciones)

01-800-902-31-00 (Industrias Birtman)

See the KitchenAid Warranty and Service section for additional details. Do not return the blender to the retailer – retailers do not provide service.

13