8.Check that food is centered with the rotisserie burner. If not, loosen wing nuts, reposition food and retighten wing nuts.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
9.Plug into a grounded 3 prong outdoor GFI outlet.
■To avoid electrical shock, do not immerse cord or plugs in water or other liquid.
■Unplug from the outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts.
■Do not operate any outdoor cooking gas appliance with a damaged cord, damaged plug, or after the appliance malfunctions or has been damaged in any manner. Contact the manufacturer for repair.
■Do not let the cord hang over the edge of a table or touch hot surfaces.
■Do not use an outdoor cooking appliance for purposes other than intended.
■When connecting, first connect plug to the outdoor cooking gas appliance then plug appliance into the outlet.
■Use only a Ground Fault Interrupter (GFI) protected circuit with this outdoor cooking gas appliance.
■Do not remove the ground prong or use with an adapter of 2 prongs.
10.Turn on the rotisserie motor and light the rotisserie burner. See the following “Lighting the Rotisserie Burner” section.
Lighting the Rotisserie Burner
1.Do not lean over the grill.
2.Push in and turn the control knob to LITE/HI. You will see the igniter glow or hear the “snapping” sound of the spark (depending on your model).
3.When the rotisserie burner lights, continue to hold the knob in for another 10 seconds, then release the knob and burner will stay lit.
IMPORTANT: If the rotisserie burner does not light immediately, turn the burner knob to OFF and wait 5 minutes before relighting.
Manually Lighting the Rotisserie Burner
1.Do not lean over the grill.
2.Remove the manual lighting extension (see following illustration) and attach a match to the split ring.
3.Strike the match to light it.
4.Gently hold the lit match close to the rotisserie burner.
A
B
A. Lighting extension
B. Rotisserie burner
5.Push in and turn the control knob to LITE/HI. Hold this knob in for 10 seconds after the burner is lit. You may see the igniter glow or hear the “snapping” sound of the spark (depending on your model) until after the knob is released.
IMPORTANT: If the rotisserie burner does not light immediately, turn the rotisserie burner control knob to “OFF” and wait 5 minutes before relighting.
6.Remove the match and replace the manual lighting extension inside the plastic pouch.
28
